Assembly Steps:
- Take the two top semicircular steel tube frames and the calming cushion cover and one at a time thread the semicircular steel tubes through the cushion cover.
- Connect the semicircular top frame steel tubes together by inserting into the hollow end of each tube. Make sure the connecting ends are visible and lined up in the two holes of the cover, leave the velcro strips open.
- Please note: We have improved the design of the Cat Hammock making it easier to put together. Depending on the model you have bought, your Calming Pet Hammock may or may not include the reinforced steel bar used connect the top ring to the legs. Follow the appropriate steps 3 and 4 below depending on your model.
3. Products with reinforced steel bar: Connect the middle of the semicircular leg frame to the top frame with the reinforced steel bar, screws and nuts. Connect the steel tube support bars to the bottom of the semicircular steel leg frame with screws.
3.b Products without reinforced steel bar: Connect the middle of the semicircular leg frame to the top frame with the screws and nuts. Connect the steel tube support bars to the bottom of the semicircular steel leg frame with screws - Repeat this process on the other side.
- Insert the soft filled cushion insert into the calming hammock cover.
- Secure the velcro tabs.
